CONTACT LENS CARE PRODUCTS AT-A-GLANCE

0
SOLUTION TYPE INDICATION
CARE REGIMEN
BENEFITS
Alcon Laboratories | 800.451.3937 | Alcon.com
CLEAR CARE
PLUS with
HydraGlyde
Moisture Matrix
3% hydrogen
peroxide solution

soft contact lenses, including silicone hydrogel lenses; rigid gas permeable contact lenses

1. Place lenses into domed lens holder, and thoroughly rinse with solution for five seconds.
2. Fill the lens cup to the fill line with solution, place the lens holder in the lens cup, and store lenses for at least six hours to neutralize the solution. Do not shake the lens case.
3. Discard used solution, rinse the lens cup and lens holder with sterile saline or fresh CLEAR CARE PLUS, and allow to air dry cap side down.
• Biocompatible deep cleaning and disinfection
• Triple action cleaning: deep cleans, loosens dirt and enhances protein removal
• Preservative-free
OPTI-FREE
PUREMOIST
multipurpose
solution
silicone hydrogel
and soft lenses
1. Wet lenses with solution and rub for 20 seconds.
2. Rinse each side of the lens for 10 seconds with a steady stream of the solution.
3. Store lenses in the solution for at least six hours. Rinse any remaining debris with solution.
• Contains HydraGlyde Moisture Matrix for comfort and to help keep moisture on the lenses
• The POLYQUAD and ALDOX dual-disinfectant system reduces harmful microorganisms
• Reduces lipid deposition and removes protein deposits for fresh, clean lenses
Bausch + Lomb | 800.828.9030 | Bausch.com
Biotrue
multipurpose
solution
soft contact lenses, including silicone hydrogel lenses 1. Place at least three drops of solution on each side of lens surface and gently rub for 20 seconds.
2. Thoroughly rinse each side of the lens for five seconds, place in case and fill with fresh solution and soak for at least four hours. Discard solution from lens case after each use.
3. Rinse any remaining debris on lenses with solution prior to insertion.
• Contains hyaluronan, a lubricant found naturally in eyes
• Matches the pH of healthy tears
• Keeps certain beneficial tear proteins active
• Up to 20 hours of moisture
• Kills 99.9% of germs
renu Advanced Formula
multipurpose
solution

soft contact lenses, including silicone hydrogel lenses 1. Place three drops of solution on each side of the lens surface and gently rub for 20 seconds.
2. Thoroughly rinse each side of the lens for five seconds, then place in the lens case and fill with solution.
3. Soak at least four hours. Discard solution from lens case after each use.
4. If any debris remains on contact lenses, rinse with renu Advanced Formula.
• Unique triple disinfectant system kills 99.9% of germs
• Helps prevent the formation of deposits on lenses when used daily
• Provides all day comfort
CooperVision | 800.341.2020 | CooperVision.com
Lite
multipurpose
solution
suitable for all lens types 1. Place three drops of multipurpose solution on each side of the lens.
2. Gently rub both sides of the lens with the tip of the forefinger for 10 seconds.
3. Thoroughly rinse each side of the lens for five seconds with fresh solution.
4. Fill the lens case with fresh solution and let lenses soak at least six hours. Rinse each side of the lens with fresh multipurpose solution prior to insertion.
5. Discard remaining solution, rinse the lens case thoroughly with fresh solution and let air dry.
• Specially formulated for patients with sensitive eyes
• Contains a lubricant to help prevent contact lenses from drying out
Refine One Step Hydrogen Peroxide Solution
3% hydrogen peroxide solution
soft contact lenses
1. Place lenses in basket, close and rinse each lens for five seconds with the solution.
2. Fill the lens case with fresh solution, place the lens holder inside the lens case, make sure the lens case is in an upright position and allow lenses to soak for at least six hours.
3. Discard remaining solution and leave lens case open to air dry.
• Highly effective disinfection against bacteria and fungi
• Preservative-free
Johnson & Johnson Vision | 800.843.2020 | JNJVisionPro.com
Blink
Revitalens
multipurpose
disinfecting
solution
soft (hydrophilic)
contact lenses, including silicone hydrogel lenses
1. Place three or more drops of solution on one side of lens surface, rub lens for two to four seconds, turn the lens over and repeat.
2. Rinse each side of the lens for five seconds with solution.
3. Allow lenses to soak for at least six hours.
• Provides exceptional disinfection and all-day comfort
• Disinfects like a peroxide with the simplicity of an advanced multi-purpose solution
• Dual-Disinfecting Technology effectively kills harmful bacteria
COMPLETE multipurpose
solution
soft (hydrophilic)
contact lenses
1. Place three drops or more of solution on one side of the lens surface. Rub lenses gently for at least 10 seconds, then turn over and repeat.
2. Rinse each side of the lens for five seconds with fresh solution, place in lens case and fill with solution.
3. Allow lenses to soak for a minimum of six hours.
• Promotes disinfection by removing and killing a broad range of bacteria and microorganisms on lenses to help protect eyes against infection
• Contains four beneficial electrolytes to promote a healthy lens-wearing experience
Oxysept Disinfecting Solution/ Neutralizer Ultracare Formula
3% hydrogen peroxide solution soft contact lenses
1. Gently rub each lens with an appropriate daily cleaner, rinse thoroughly with sterile saline, and place in the lens holder.
2. Fill the cup with disinfecting solution, drop one neutralizing tablet into the solution, and place the lens holder into the cup. Turn the cup upside down, then right side up three consecutive times.
3. Soak for at least six hours. Before removing lenses, turn the lens case upside down to ensure full neutralization of all residual disinfecting solution.
• Dissolving tablet that changes color to indicate that it’s been added at the beginning of the soaking period, eliminating the risk of residual peroxide
• Protection against a broad range of microorganisms
• Preservative-free
• Built-in lubricant
Share.

Leave A Reply